Summary
On May 31, 2001, a Bell 47G-4A (N110DT) was involved in an incident near Buttonwillow, CA. All 1 person aboard were uninjured. The aircraft sustained substantial damage.
The National Transportation Safety Board determined the probable cause of this incident to be: The pilot's inadequate in-flight planning that resulted in settling with power during an aerial application turn-to-reverse direction and collision with the ground. Factors were high density altitude and a wind shift.
On May 31, 2001, at 1136 hours Pacific daylight time, a Bell 47G-4A, N110DT, collided with the ground during an aerial application turn to reverse direction near Buttonwillow, California. The helicopter sustained substantial damage; however, the certificated commercial pilot was not injured. The helicopter was being operated by Inland Crop Dusters, Inc., as an aerial application flight under 14 CFR Part 137 when the accident occurred. The flight had originated in the Bakersfield area earlier that morning.
This incident is documented in NTSB report LAX01LA196. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N110DT.
Accident Details
Probable Cause and Findings
The pilot's inadequate in-flight planning that resulted in settling with power during an aerial application turn-to-reverse direction and collision with the ground. Factors were high density altitude and a wind shift.
Aircraft Information
Registered Owner (Historical)
Analysis
On May 31, 2001, at 1136 hours Pacific daylight time, a Bell 47G-4A, N110DT, collided with the ground during an aerial application turn to reverse direction near Buttonwillow, California. The helicopter sustained substantial damage; however, the certificated commercial pilot was not injured. The helicopter was being operated by Inland Crop Dusters, Inc., as an aerial application flight under 14 CFR Part 137 when the accident occurred. The flight had originated in the Bakersfield area earlier that morning. Visual meteorological conditions prevailed at the time and no flight plan had been filed.
The pilot was reported by Kern County Sheriff's Deputies to have been performing an aerial application flight when the helicopter crashed.
According to the pilot, he was making a series of steep 180-degree turns between aerial application passes. He reported that on the last turn the helicopter began to "settle with power" and there was not enough time to recover. By his account, wind direction was a contributing factor.
Wind speeds recorded at Bakersfield weather station were variable at 3 knots.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX01LA196