N999DW

Substantial
None

Bell 47G-3B-1S/N: 6604

Accident Details

Date
Saturday, June 8, 2002
NTSB Number
FTW02LA177
Location
Nederland, CO
Event ID
20020612X00856
Coordinates
40.667778, -106.052497
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

the pilot's inadvertent in-flight encounter with severe turbulence, which resulted in main rotor-tailboom contact and the separation of the tailrotor drive shaft.

Aircraft Information

Registration
Make
BELL
Serial Number
6604
Engine Type
Reciprocating
Year Built
1967
Model / ICAO
47G-3B-1B47G
Aircraft Type
Rotorcraft
No. of Engines
1
Seats
3
FAA Model
47G-3B-1

Registered Owner (Current)

Name
WORTHETT LLC
Address
6855 S DAYTON ST # 4798
City
ENGLEWOOD
State / Zip Code
CO 80112-3622
Country
United States

Analysis

On June 8, 2002, at 1030 mountain daylight time, Bell 47G-3B-1 helicopter, N999DW, was substantially damaged when it encountered turbulence while in cruise flight near Nederland, Colorado. The helicopter was registered to and operated by the pilot. The private pilot, sole occupant of the helicopter, was not injured. Visual meteorological conditions prevailed, and a flight plan was not filed for the 14 Code of Federal Regulations Part 91 personal flight. The local flight originated from the pilot's private staging area in Nederland at 0900.

According to the pilot, he obtained weather from a television station in Denver, Colorado. The weather forecast called for winds from the southwest at 30 mph, with gusts up to 40 mph. The flight departed, flew approximately 1.5 hours , and was in cruise flight at 9,000 feet (700 feet agl) with a 20-25 knot headwind experiencing light turbulence, when the flight encountered "severe turbulence." The pilot stated that the helicopter went "up and down violently for period of 2-3 seconds." The tailrotor driveshaft was severed by the main rotor, and the helicopter then experienced "a right yaw that full application of left pedal would not correct." The pilot stated that during the event the engine and rotor rpm increased past their upper limits. He was able to bring the engine and rotor rpm within limits and regained control of the helicopter. Subsequently, the pilot performed an autorotation to sloping terrain without further incident. The pilot examined the helicopter and reported that the tailrotor drive shaft was separated, the tailboom was damaged, and one main rotor blade was damaged.

According to a witness, who was fishing on a lake 4 miles from the accident site, he observed water spouts between 2 and 8 feet tall and high swirling winds near the time of the accident. The witness further stated that "in 26 years of backpacking to high lakes I had never seen this happen."

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# FTW02LA177