N2483B

Substantial
None

Bell 47G-2S/N: 1459

Accident Details

Date
Sunday, July 7, 2002
NTSB Number
LAX02LA218
Location
Compton, CA
Event ID
20020712X01106
Coordinates
33.883335, -118.233329
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

the failure and separation of a fan belt for the engine cooling system. A factor in the accident was the inadequate annual inspection 14 hours prior to the accident.

Aircraft Information

Registration
N2483B
Make
BELL
Serial Number
1459
Engine Type
Reciprocating
Year Built
1956
Model / ICAO
47G-2B47G
Aircraft Type
Rotorcraft
No. of Engines
1

Registered Owner (Historical)

Name
OCHWATT JOHN A
Address
3028 FIDLER AVE
Status
Deregistered
City
LONG BEACH
State / Zip Code
CA 90808-3503
Country
United States

Analysis

On July 7, 2002, about 1145 Pacific daylight time, a Bell 47G-2, N2483B, experienced a partial loss of engine power during cruise flight and collided with power lines during a forced landing near Compton, California. The pilot/owner was operating the helicopter under the provisions of 14 CFR Part 91. The pilot and one passenger were not injured; the helicopter sustained substantial damage. Visual meteorological conditions prevailed, and a flight plan had not been filed. The personal local flight originated at the Compton/Woodley Airport about 1100.

In a written statement, the pilot reported that about 45 minutes after departure, the helicopter was about 1,000 feet above ground level (agl), and moving in an easterly direction with an airspeed of 70 knots. He felt a "severe" vibration and noted a drop in the helicopter's rotor rpm. As the vibrations continued, he manipulated the flight controls in an effort to maintain a controlled descent. While searching for a suitable landing area, he verified that the engine rpm indicated zero. About 200 feet agl he noticed that power lines were in the helicopter's path, and turned the helicopter in a unsuccessful effort to avoid them and an accompanying pole. The helicopter came to rest in a dirt field on the corner of the 91 freeway and Alondra Blvd.

During a telephone interview with a National Transportation Safety Board investigator, the brother of the pilot, a mechanic with inspection authorization (IA) who regularly worked on N2483B, examined the helicopter after the accident. He stated that a fan belt used in the integral system for cooling the engine had either broken or come loose. As a result, the belt wrapped around the pulley, which caused the transmission to drag. The pilot autorotated the helicopter into power lines and impacted terrain.

The IA further noted that the engine ran fine after the accident, and the fuel system was free of particulates and contaminates. He said that he completed the annual inspection for the helicopter about 14 hours prior to the accident, at which time he believed that he examined the belts. He further stated the helicopter was stored outside, in a corrosive environment.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX02LA218