N1592F

Substantial
None

Cessna 185ES/N: 0974

Accident Details

Date
Saturday, September 10, 2005
NTSB Number
ANC05LA142
Location
Pilot Point, AK
Event ID
20050916X01480
Coordinates
57.210094, -153.320251
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot's misjudged landing flare, which resulted in a hard landing and an overload failure of the main landing gear during the landing touchdown.

Aircraft Information

Registration
Make
CESSNA
Serial Number
0974
Engine Type
Reciprocating
Year Built
1966
Model / ICAO
185EC185
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
185E

Registered Owner (Current)

Name
REYNOLDS FREDERICK A
Address
PO BOX 492
City
PILOT POINT
State / Zip Code
AK 99649-0492
Country
United States

Analysis

On September 9, 2005, about 1930 Alaska daylight time, a Cessna 185E airplane, N1592F, sustained substantial damage when the left main landing gear collapsed during an off airport landing, about 30 miles southeast of Pilot Point, Alaska. The airplane was being operated by the pilot as a visual flight rules (VFR) personal cross-country flight under Title 14, CFR Part 91, when the accident occurred. The solo private pilot was not injured. Visual meteorological conditions prevailed, and no flight plan was filed. The flight originated at the Pilot Point Airport, Pilot Point, about 1900.

During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on September 10, the pilot said during landing at a sod covered, off airport site, the left main landing gear collapsed. The airplane sustained structural damage to the gear box, left wing, aileron, and horizontal stabilizer. The pilot said that upon examination of the main landing gear strut, he found the main landing gear attachment bolt had broken. He said there were no known mechanical anomalies with the airplane prior to the accident.

In a written statement to the NTSB dated October 10, the pilot wrote that a by-stander told him that upon initial contact during landing, the airplane bounced 12-18 inches off the ground before settling onto the runway area a second time.

The broken bolt, along with new, exemplar bolts, from the same production lot, were sent to the NTSB materials laboratory in Washington, D.C., for examination. The examination revealed that the landing gear retention bolt had broken in a "ductile overstress separation in bending and shear mode." The examining metallurgist concluded the bolt was made of the appropriate material, and was of the proper dimensions.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ANC05LA142