N96ND

Destroyed
None

Bell 206BS/N: 4400

Accident Details

Date
Tuesday, June 26, 2007
NTSB Number
CHI07CA181
Location
Grand Forks, ND
Event ID
20070712X00922
Coordinates
47.949165, -97.176109
Aircraft Damage
Destroyed
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The certified flight instructor's inadequate compensation for the gusting wind conditions and failure to maintain control of the helicopter during a hover for takeoff. A factor contributing to the accident was the gusting wind conditions.

Aircraft Information

Registration
N96ND
Make
BELL
Serial Number
4400
Engine Type
Turbo-shaft
Year Built
1996
Model / ICAO
206BB06
Aircraft Type
Rotorcraft
No. of Engines
1

Registered Owner (Historical)

Name
SALE REPORTED
Address
NONE
Status
Deregistered
City
XXX
State / Zip Code
OK 73125
Country
United States

Analysis

The helicopter was destroyed when it impacted terrain and rolled over during takeoff hover. The certified flight instructor (CFI) reported that the helicopter startup and runup was uneventful. The student pilot hover taxied the helicopter from the ramp to a sod area near Bravo taxiway. The student landed the helicopter and the CFI took over the controls so that the student could put on his view limiting device to prepare for the instrument flight. The CFI stated that when the helicopter lifted off the ground, a gust of wind pitched the nose up and the helicopter drifted rearward. The right side skid caught the ground and the helicopter subsequently rolled on its side, causing damage to both the main and tail rotor blades, the cabin, and the landing gear skids. An examination of the helicopter revealed no pre-impact anomalies.

Wind conditions reported near the time of the accident were: Wind 270 degrees at 15 knots, gusting to 22 knots.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CHI07CA181