Accident Details
Probable Cause and Findings
The pilot's failure to maintain directional control on landing.
Aircraft Information
Registered Owner (Current)
Analysis
According to the pilot, he made an approach to the airport, flew a normal landing pattern, and touched down in the first 1/4 of runway 27. The landing flare was "going very well," and he allowed the airplane to settle to the ground in a "three point attitude." As the airplane's airspeed decreased and it settled to the ground, it began to veer slightly to the right. During the correction back to the runway, the airplane ground looped in a counterclockwise direction. The pilot reported no mechanical problems with the airplane.
The pilot reported that runway 27 is an upslope runway, and the surface is a little uneven. He stated that he should have wheel landed the airplane and held the tail up until the speed had dissipated. The pilot stated that if he had kept the tail up, it would have given him time to recognize a potential ground loop situation, and react appropriately.
The accident occurred on August 31, 2007. On December 6, 2007, a Federal Aviation Administration inspector from the Fresno, California, Flight Standards District Office reported the accident to the National Transportation Safety Board.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX07CA289