N9067MCESSNA 180H2011-01-26 NTSB Accident Report

Substantial
None

CESSNA 180HS/N: 18052167

Summary

On January 26, 2011, a Cessna 180H (N9067M) was involved in an incident near Helena, MT. All 2 people aboard were uninjured. The aircraft sustained substantial damage.

The National Transportation Safety Board determined the probable cause of this incident to be: The certified flight instructor's loss of airplane control during the landing roll in a gusting crosswind.

During the first part of the training flight in the conventional wheel (tail wheel-equipped) airplane, the pilot receiving instruction made four stop-and-go landings on a runway that was almost directly aligned with the oncoming wind. At that point the instructor pilot took over in order to demonstrate a landing on a different runway where there was a crosswind of about 10 to 12 knots at 90 degrees to the runway. The instructor pilot made a successful touchdown on the main landing gear wheels, but as the airplane slowed and he began to lower the tail to the runway surface, the upwind wing was lifted by a gust of wind.

This incident is documented in NTSB report WPR11CA109. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N9067M.

Accident Details

Date
Wednesday, January 26, 2011
NTSB Number
WPR11CA109
Location
Helena, MT
Event ID
20110126X71311
Coordinates
46.606945, -111.982780
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The certified flight instructor's loss of airplane control during the landing roll in a gusting crosswind.

Aircraft Information

Registration
Make
CESSNA
Serial Number
18052167
Engine Type
Reciprocating
Year Built
1970
Model / ICAO
180HC180
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
STATE OF MONTANA
Address
1625 11TH AVE
Status
Deregistered
City
HELENA
State / Zip Code
MT 59601
Country
United States

Analysis

During the first part of the training flight in the conventional wheel (tail wheel-equipped) airplane, the pilot receiving instruction made four stop-and-go landings on a runway that was almost directly aligned with the oncoming wind. At that point the instructor pilot took over in order to demonstrate a landing on a different runway where there was a crosswind of about 10 to 12 knots at 90 degrees to the runway. The instructor pilot made a successful touchdown on the main landing gear wheels, but as the airplane slowed and he began to lower the tail to the runway surface, the upwind wing was lifted by a gust of wind. Although the instructor pilot made control inputs to counter the lifting of the wing, the opposite wing impacted the surface of the runway, and the airplane veered toward the upwind runway edge. Before the instructor pilot could regain directional control, the airplane departed the right side of the runway, entered an area of soft terrain, and nosed over onto its back. According to the instructor pilot, there was no evidence of a flight control or rudder control malfunction.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR11CA109