N222BP

Substantial
None

PIPER PA-30 BS/N: 30-1510

Accident Details

Date
Thursday, August 23, 2012
NTSB Number
WPR12LA366
Location
Scappoose, OR
Event ID
20120823X20225
Coordinates
45.769165, -122.856941
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The failure of the landing gear to fully extend as a result of a failure of the landing gear transmission assembly for reasons that could not be determined based on the available evidence.

Aircraft Information

Registration
N222BP
Make
PIPER
Serial Number
30-1510
Engine Type
Reciprocating
Year Built
1967
Model / ICAO
PA-30 BPA30
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
PEARSON WARD N
Address
29405 NE 112TH AVE
Status
Deregistered
City
BATTLE GROUND
State / Zip Code
WA 98604-9591
Country
United States

Analysis

On August 23, 2012, about 1630 Pacific daylight time (PDT), a Piper PA-30 B, N222BP, made a gear up landing at Scappoose Industrial Airpark, Scappoose, Oregon. The owner/pilot was operating the airplane under the provisions of 14 Code of Federal Regulations (CFR) Part 91. The private pilot was not injured; the airplane sustained substantial damage to the underbelly structure during the landing on the grass next to runway 33. The cross-country personal flight departed Vancouver, Washington, about 1600. Visual meteorological conditions prevailed, and no flight plan had been filed.

The pilot reported that prior to landing, he lowered the landing gear, but it would not fully extend. He attempted to manually extend the gear but was unsuccessful. The pilot determined that due to his low fuel state he would perform a gear up landing. He elected to land on the soft infield grass adjacent to runway 33 versus on the runway itself in an attempt to minimize the damage to the airplane.

After recovery of the airplane, it was determined that the lower fuselage had sustained substantial damage to the structure as a result of the soft ground ripping the aluminum sheet metal and belly frame structure. The airplane was secured for further examination of the landing gear.

The airplane was examined by maintenance personnel and an inspector from the Federal Aviation Administration (FAA). During the examination, it was found that there was a failure of the landing gear transmission assembly, which prevented the extension of the nose landing gear. The landing gear transmission assembly was replaced, but the damaged assembly was not retained for further testing due to a miscommunication with the repair facility.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR12LA366