N50KH

HISTORY OF FLIGHTOn March 30, 2015, about 1436 central daylight time, a Bell 206 L-1, N50KH, registered to HLW Aviation, LLC and operated by T & M Aviation, Inc. under contract to the United States Forest Service, was destroyed by controlled burn fire after it impacted terrain near Saucier, Mississippi. The commercial pilot and the front left seat crew member were fatally injured; the rear seat crew member sustained serious injuries. Visual meteorological conditions prevailed and no flight plan was filed for the aerial application flight that was conducted under the provisions of Title 14 Code of Federal Regulations Part 137. The flight departed Dean Griffin Memorial Airport (M24), Wiggins, Mississippi, about 1334.

After a pre-mission briefing at M24, the flight departed to assist in the scheduled burn of an 800 acre wooded area through a process known as "aerial ignition." A witness that observed the helicopter prior to the accident was walking a road on the southern end of the burn area when he noticed the helicopter "make a turn and go back." About 7 seconds after the turn, the witness heard a sound that resembled an air hose being unplugged from a high pressure air tank, and heard the helicopter impact terrain about three seconds later. With the exception of the high pressure sound, the witness did not observe anything unusual with the helicopter. According to the witness, the helicopter's last transmission to ground personnel was approximately 7 minutes prior to the accident.

Several Forest Service personnel were performing controlled burn functions on the ground during the mission. About 6 employees were located near the northeastern tip of the planned burn area, 1 employee was located at the western end, and 3 employees were stationed at the southeastern end, where the helicopter came to rest. Multiple witnesses on the ground, were in contact with the accident helicopter during the operation; however, none of the witnesses observed the helicopter crash nor did they hear a distress call prior to the accident. Several witnesses observed small plumes of smoke scattered across the burn area blowing east as a result of the western wind. One witness reported that a helicopter crewmember inquired about the smoke levels during the mission and made a decision to continue after he determined the smoke levels would not pose a hazard to the flight. None of the witnesses observed the helicopter come into contact with smoke.

Satellite tracking data provided by the online government contracted application Automated Flight Following (AFF), and monitored by a Forest Service dispatch office through a unit mounted in the helicopter, indicated that the helicopter had been operating at a low altitude over the controlled burn area for approximately 56 minutes prior to the accident. According to the data, the helicopter had been flying a grid pattern from the northwest to the southeast. The last recorded position for the helicopter at 1433, indicated that it was at an altitude of 354 feet mean sea level (132 feet above ground level (AGL)), a heading of 150 degrees true and a calculated groundspeed of 43 knots. Forest Service employees reported that the flight pattern for firing is normally based on wind parameters and vegetative conditions to control for smoke management and burn results. According to the surviving crew member, the accident helicopter and crew completed a reconnaissance flight on the morning of the accident flight to evaluate the prescribed burn area. The AFF satellite tracking data showed that the flight was completed in approximately 72 minutes.

The surviving crew member stated that he was operating a plastic sphere dispenser (PSD) from the rear right seat at the time of the accident. This device injects plastic spheres filled with potassium permanganate with glycol and dispenses them below the helicopter. Towards the end of the aerial ignition mission, the helicopter was in "slow" forward flight about 20 feet above the trees when the surviving crew member heard "buzzers and alarms" and the engine spool down. Almost simultaneously, the pilot announced "we lost power" and the firing boss remarked "we are going in." The helicopter completed a quarter turn and "slipped" through the trees in a nose high attitude; it subsequently impacted the ground hard and came to rest on its left side. The surviving crew member did not receive a response from the front seat occupants despite his attempts to get their attention. The wreckage was not on fire after it came to rest, but the crew member observed an approaching ground fire from the controlled burn and decided to vacate the area to a nearby Forest Service road. The surviving crew member reported that the helicopter was in level forward flight at an estimated airspeed of approximately 50 knots when the pilot announced a loss of power.

The audio files from the helicopter's aural warning system were played for the surviving crew member during a follow-up telephone conversation. The crew member recognized both alarms and arranged them in the following sequence: the sustained alarm immediately followed by the fast pulse alarm. According to the manufacturer, the sustained alarm corresponds with the low rpm horn and the fast pulse alarm is an engine out indication; however, the pulsed tone will sometimes follow the steady tone when a power loss occurs.

The surviving crew member recounted the events that transpired during a failed engine start attempt that occurred before the accident flight. He described hearing "whine" and "clicking" sounds with the absence of the turbine flame associated with a normal engine start. The second attempt resulted in a successful engine start, which was preceded by a "click, click, click" of the igniter followed by the flame of the turbine. PERSONNEL INFORMATIONThe pilot, age 40, held a commercial pilot certificate with ratings for rotorcraft-helicopter, airplane single engine land, and instrument airplane. He additionally held a mechanic's certificate with ratings for airframe and powerplant, which was issued on May 19, 2005. His most recent Federal Aviation Administration (FAA) second-class medical certificate was issued on February 23, 2015 with the limitation, "must wear corrective lenses."

According the pilot's resumé, in 1998, he accepted a position as an aircraft technician with T&M Aviation and subsequently received flight instruction from a company owner. After he obtained his private pilot certificate, he performed ferry flights for the company until 2005, when he received his commercial pilot certificate and was subsequently approved to fly under the company's Federal Aviation Regulations (FAR) Part 135 certificate. The pilot's flight experience between 2006 and the date of the accident, included agricultural spraying, long line external load, low level reconnaissance flights, and prescribed burn operations. Additionally, he maintained the company's helicopters as a mechanic during this time and served as the director of maintenance from 2010 through 2013. According to the aircraft owner's records, the pilot's most recent FAR Part 135.293 and FAR Part 135.299 recurrent check was completed on February 3, 2015 in a Bell 206 L3 helicopter. The pilot satisfactorily completed the proficiency check, which involved two emergency simulations; a stuck pedal, and an autorotation.

T&M Aviation entered into a contract with the Forest Service on January 10, 2012 to conduct aerial ignition operations. Pilots of T&M Aviation were required to complete an Interagency Helicopter Pilot Qualifications and Approval Record and pass a flight evaluation by an Interagency Helicopter Inspector Pilot. The pilot's most recent mission approval was completed on April 30, 2014, at which time he was approved to fly aerial ignition operations until April 30, 2015.

According to the pilot's personal flight logbooks, he had accumulated 6,471 total hours of flight experience, about 6,300 hours of which were in the accident helicopter make and model. The owner estimated that the pilot had accrued 22 additional flight hours in the 90 days that preceded the accident flight. AIRCRAFT INFORMATIONAccording to FAA records, the accident helicopter was manufactured in 1980, at which time it was equipped with an Allison 250-C28 500 hp turbo-shaft engine. In 1993, an Allison 250-C30P 650 hp turbo-shaft engine was installed in accordance with Petroleum Helicopters, Inc. supplemental type certificate (STC) SH5695SW and modified in 2001 in accordance with Air Services International STC SH296NM. At the time of the accident, the helicopter had accrued approximately 11,602 flight hours.

A maintenance history of the helicopter was established through the operator's archived records, as the most recent maintenance records were destroyed by fire. The helicopter's most recent 100-hour inspection was completed on March 11, 2015, at which time it had accumulated 11,597 hours total time in service. Life limited component inspection schedules were listed for the gearbox, compressor and turbine, which had accrued 11,487 hours, 1,974 hours, and 1,861 hours since their most recent overhauls, respectively. A review of the component maintenance tracking history revealed that each life or time limited engine component were within their respective life expectancies.

A scheduled inspection of the accident helicopter was completed on November 20, 2014, as part of the operator's contractual agreement with the Forest Service, which did not reveal any discrepancies.

The helicopter's most recent turbine engine power check was completed on February 28, 2015, at 5,742 flight hours. A trend value of +19 was recorded under the following atmospheric conditions: 2 degrees C and a pressure altitude of 10,000 feet, which did not exceed the helicopter's operating limitations when compared to the pilot's operating handbook (POH).

The pilot completed a load calculation form, provided by the Fores...