N210LC

Substantial
None

CESSNA T210LS/N: 21061298

Accident Details

Date
Tuesday, October 18, 2016
NTSB Number
CEN17LA022
Location
Pflugerville, TX
Event ID
20161021X20519
Coordinates
30.397499, -97.566390
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

Landing gear collapse upon landing due to a hydraulic leak that led to insufficient pressure to fully extend and lock the gear in a down position.

Aircraft Information

Registration
Make
CESSNA
Serial Number
21061298
Engine Type
Reciprocating
Year Built
1976
Model / ICAO
T210LC210
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
T210L

Registered Owner (Current)

Name
VENTANA DEVELOPMENT BRAZOS LLC
Address
142 COUNTY ROAD 222
City
BAY CITY
State / Zip Code
TX 77414-2846
Country
United States

Analysis

On October 18, 2016, about 1015 central daylight time, a Cessna T210L airplane, N210LC, registered to Ventana Development Brazos LLC, Bay City, Texas, sustained substantial damage after the right main landing gear collapsed upon landing at the Austin Executive Airport (EDC), Pflugerville, Texas. The private pilot and one passenger were not injured. The cross country flight was being conducted under the provisions of Federal Code of Regulations Part 91. Visual meteorological conditions prevailed in the area and a flight plan was not filed. The flight originated from the Bay City Airport (BYY), Bay City, Texas, about 0915.

According to the pilot, upon approaching EDC, he lowered the landing gear but did not have a down-and-locked indication in the cockpit. He utilized the emergency gear extension handle to lower the gear. He felt no resistance on the emergency gear handle. After checking the wing mounted landing gear mirrors, it appeared that the landing gear was extended. The pilot circled and landed. Upon landing, the right main landing gear collapsed and the airplane skidded off the runway to the right, resulting insubstantial damage to the right side horizontal stabilizer and elevator. Airport personnel asked the FAA and NTSB to move the airplane from the runway for safety. A mechanic manually pulled down the right main landing gear into the locked position after the airplane was raised. The airplane was then removed from the runway and brought to a ramp for inspection.

When the FAA arrived at the accident scene, the aircraft was sitting on the ramp with all three wheels down and locked. Pumping of the emergency gear handle by FAA on the ramp revealed a hydraulic fluid leak near the pump with no resistance being felt on the handle. Review of available maintenance records did not revel any previous anomalies with the landing gear. The most recent annual inspection was completed on December 5, 2015.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN17LA022