N363JH

HISTORY OF FLIGHTOn October 21, 2017, about 0530 Alaska daylight time, a Raytheon Aircraft Company (RAC) B200 airplane, N363JH, sustained substantial damage following an unintentional gear-up landing at the Ted Stevens Anchorage International Airport (ANC), Anchorage, Alaska. The certificated airline transport pilot, two flight medics, and one patient sustained no injuries. The airplane was registered to and was operated by Bering Air, Inc., as a Title 14 Code of Federal Regulations Part 135 instrument flight rules air ambulance flight, operating as Medevac 363JH. Dark night, visual meteorological conditions were present at the time of the accident and flight following procedures were used by the operator. The airplane departed from the Nome Airport, Nome (OME), Alaska, about 0320.

The pilot reported that the purpose of the flight was to transport a patient to a medical treatment facility in Anchorage, Alaska. The pilot started his duty day on October 20, at 1830 at the company headquarters at OME. The medical evacuation flight was on a weather hold for several hours and the pilot got permission from the company director of operations (DO) to rest at his home about 5 minutes away. The pilot arrived at his home about 2130 and went to sleep about 2140. At 0113 on October 21, he awoke with a telephone call from the company dispatch center for a medical evacuation flight. The pilot described his sleep during the approximate 3.5-hour nap as good and added that he was "sleeping a real deep sleep." The pilot reported back to the company headquarters, completed his preflight duties, and the airplane departed from OME without incident.

The flight from OME to the ANC Class C airspace was without incident. The pilot reported that after being handed off from the Anchorage Air Route Traffic Control Center to the Anchorage Approach Control, he received clearance to descend to 6,000 ft mean sea level (msl) followed with a vector heading and a descent clearance to 2,000 ft msl. As he was descending through about 4,000 feet msl, he visually confirmed the airport and requested a visual approach. He reported the air traffic controller didn't respond to his request, and he requested a visual approach again.

The controller responded back with a vector for the instrument landing system (ILS) runway 7 right approach. The pilot reported his groundspeed was about 210 kts indicated airspeed, he joined the final approach course, and was cleared to land. He reported he believes he was given a vector heading that was too close to the final approach fix and the airplane went through the final approach fix. The pilot then received another heading and he re-established himself on the final approach course. The radar flight track data is shown below in figure 1.

Figure 1 – Radar flight track data of the airplane, showing the initial approach fix and the destination airport.

For the landing, the pilot selected the approach flaps setting. He reported he failed to visually check and confirm for the three-landing gear down and locked indication lights in the cockpit. Upon touchdown on the runway with the landing gear not extended, the airplane skid on the pod installed on the underside of the fuselage along with the two engine nacelle assemblies on each wing. During the landing sequence, the metal 4-blade Hartzell HC-E4N-3G propellers for each engine separated about midspan due to runway impact damage as shown below in figure 2. The right side forward fuselage sustained minor damage from various separated propeller blade debris impacts. The airplane came to rest on the runway, and the occupants egressed without further incident.

Figure 2 – View of the right side of the airplane on the runway.

A National Transportation Safety Board (NTSB) air safety investigator responded to the accident site, arriving about 1 hour after the accident. During a post-accident on scene inspection of the accident airplane, the landing gear selector was found in the down position.

During a post-accident interview, the pilot stated that he, "… felt real good flying the airplane from Nome to Anchorage. Just the fatigue started to set in when I was coming in the outer ring of the Class C airspace into Anchorage." He added, "I feel like my judgment was impaired at the end of the flight."

In his written statement, the pilot stated he was responsible for the accident. He listed what he believed were the mitigating factors for his performance in writing (in part):

1. Long duty period (13 hours). I felt clear and alert at the beginning of the flight, however my alertness began to diminish at the beginning of the arrival phase of the flight.

2. I failed to manage my rest accordingly.

3. I failed to manage the cockpit accordingly. Had I selected flaps beyond approach flaps I would have received a gear handle light and a warning horn.

4.I failed to check for the 3 gear down and locked lights.

5. I am feeling very comfortable in the BE20; however, I allowed for complacency to set in.

The operator reported that there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation. PERSONNEL INFORMATIONOn October 19, the pilot reported he went to sleep at 1000 and woke up about 1400. He took a nap from 1700 to 1800. He went on duty at 1935 and was off duty at 0925 on October 20. On October 20, the pilot reported he went to sleep at 1000, but did not recall when he awoke. He reported sleeping again from about 2140 on October 20, to 0113 on October 21.

A review of the company's flight and duty records revealed the pilot worked the two days prior to the accident, but not did perform flight duties. The preceding three and four days prior to the accident, the pilot flew a total of 8.1 hours. The preceding fifth and sixth days prior to the accident, the pilot worked but did not perform flight duties. The remaining preceding days in the month of October 2017, the pilot was on vacation.

A review of the company's pilot training records revealed the pilot received basic indoctrination training on November 11, 2014, with the latest recurrent basic indoctrination training being received on December 22, 2016. The pilot received initial RAC B200 ground curriculum training on March 13, 2016. The pilot received the latest recurrent RAC B200 ground curriculum training on December 29, 2016. The pilot did not recall whether he had received any training on fatigue management, circadian rhythms, or sleep disorders since he has been employed at Bering Air.

A Federal Aviation Administration (FAA) review of the pilot's FAA medical records found no reported or diagnosed issues with fatigue or sleeping.

The pilot reported he had no difficulties falling asleep, but he might "occasional get an interruption". He would take naps while on duty while waiting for a flight to be assigned. He further reported he has never "nodded off" or fallen asleep in the airplane while performing the duties as a pilot. AIRCRAFT INFORMATIONThe airplane was equipped with a Garmin G1000 all-glass avionics suite.

The RAC B200 (also called a "King Air) Pilot's Operating Handbook (POH) describes the landing gear system and states in part:

The retractable tricycle landing gear is electronically controlled and hydraulically activated.

In flight, as the landing gear moves to the full down position, the down lock switches are actuated and interrupt current to the pump motor. When the red gear in-transit light in the LDG GEAR CONTROL extinguishes and the three green GEAR DOWN indicators illuminate, the landing gear is in the fully extended position.

The POH also describes the landing gear warning system and states in part:

The landing gear warning system is provided to warn the pilot that the landing gear is not down during specific flight regimes. Various warning modes result, depending upon the position of the flaps.

With the FLAPS in the UP or APPROACH position and either or both power levers retarded below approximately 80% N1, the warning horn will sound intermittently and the LDG GEAR CONTROL lights will illuminate. The horn can be silenced by pressing the GEAR HORN SILENCE button located on the left power lever. The lights in the LDG GEAR CONTROL cannot be cancelled. The landing gear warning system will be rearmed if the power levers are advanced sufficiently.

With the FLAPS beyond APPROACH position, the warning horn and LDG GEAR CONTROL lights will be activated regardless of the power settings, and neither can be cancelled.

The Bering Air King Air G1000 Normal Procedures checklist discusses the before landing procedures and states:

Gear – Down

Lights – On

Ice Vanes – Extended

Yaw Damp – Off

Flaps – Set & Ind AIRPORT INFORMATIONThe airplane was equipped with a Garmin G1000 all-glass avionics suite.

The RAC B200 (also called a "King Air) Pilot's Operating Handbook (POH) describes the landing gear system and states in part:

The retractable tricycle landing gear is electronically controlled and hydraulically activated.

In flight, as the landing gear moves to the full down position, the down lock switches are actuated and interrupt current to the pump motor. When the red gear in-transit light in the LDG GEAR CONTROL extinguishes and the three green GEAR DOWN indicators illuminate, the landing gear is in the fully extended position.

The POH also describes the landing gear warning system and states in part:

The landing gear warning system is provided to warn the pilot that the landing gear is not down during specific flight regimes. Various warning modes result, depending upon the position of the flaps.

With the FLAPS in the UP or APPROACH position and either or both power levers retarded below approximately 80% N1, the warning horn will sound intermittently and the LDG GEAR CONTROL lights will illuminate. The horn can be silenced by pressing the GEAR HORN SILENCE button located on the left power lever. The lights in the L...