N244TW

HISTORY OF FLIGHTOn May 20, 2018, about 1950 Pacific daylight time, a Piper PA24-250 airplane, N244TW, sustained substantial damage shortly after landing at Norman Y. Mineta San Jose International Airport (SJC), San Jose, California. The private pilot was not injured. The airplane was registered to two private individuals, and was operated by the pilot as a Title 14 Code of Federal Regulations Part 91 personal flight. Visual meteorological conditions prevailed at the time of the accident and no flight plan was filed. The flight had originated from French Valley Airport (F70), Murrieta/Temecula, California about 1730.

According to the pilot, he had rented the airplane from Plus One Flyers, located at McClellan-Palomar Airport (CRQ), Carlsbad, California. Early on the day of the accident, the pilot flew the airplane from CRQ to F70, and landed uneventfully. He departed F70 that afternoon, destined for SJC. Near the "Pruneyard" visual flight rules (VFR) reporting point, he contacted the SJC air traffic control tower (ATCT), and was instructed to cross midfield at 2,000 ft. After he crossed over the airport, he entered a right downwind leg for runway 30R.

Once stabilized on the downwind leg, the pilot reduced the engine power, extended the landing gear, and verified that the landing gear position indicator light was illuminated green, which denoted that the landing gear was down and locked into position. The pilot began a descent and turned onto base leg, and then again verified that the landing gear was down and locked. He confirmed with SJC ATCT that he was cleared to land, and turned final for runway 30R. The approach and touchdown were normal and uneventful, and the pilot then began to brake the airplane. About the intersection of runway 30R and taxiway Echo, when the airplane was traveling about 30 mph, the landing gear "suddenly collapsed." The airplane slid on its belly, and came to a stop approximately 150 ft beyond taxiway Echo.

After the ATCT controllers determined that the airplane was immobilized, and verified that the pilot was uninjured, the controllers dispatched airport safety personnel to assist. The airplane was lifted and towed to a secure location on the airport. Subsequent examination by Federal Aviation Administration (FAA) inspectors determined that the there was substantial damage to the airplane fuselage structure. PERSONNEL INFORMATIONThe pilot held a private pilot certificate with a single-engine land rating. He reported a total flight experience of about 250 hours, including about 87 hours in complex airplanes, and about 9 hours in the accident airplane make and model. His most recent flight review was completed in December 2017. His most recent FAA third-class medical certificate was issued in November 2015. AIRCRAFT INFORMATIONThe airplane was manufactured in 1958, and was equipped with a Lycoming O-540 series piston engine. The airplane was purchased by its current owners in 2013, who placed it on leaseback to Plus One Flyers. According to the maintenance records, the most recent annual inspection was completed on May 18, 2018. At that time the airplane had accumulated a total time in service of about 2,918 hours. The maintenance records indicated that all applicable FAA airworthiness directives (AD), including AD 77-13-21 for the main landing gear bungees, had been complied with.

Landing Gear System

The tricycle-style landing gear (LG) is electrically controlled during normal operation by a landing gear handle on the instrument panel, and electrically actuated by a single motor-transmission mounted in the cockpit floor. All 3 LG are mechanically interlinked, and move in unison. Once adjusted by a technician, their geometric inter-relationship is fixed, and can only be altered by re-adjustment, or mechanical deformation of one or more of the system components.

When extended, each LG assembly is locked in place by an overcenter link assembly, whereby the integral stops on each LG assembly prevent overtravel during extension, while ensuring that each LG assembly is fully extended. The travel of each LG assembly and its links during extension is governed by mechanical adjustment of the system's respective links. Nose LG (NLG) travel is accomplished by adjustment of the NLG actuating rod and rod end assembly that extend forward from the landing gear motor-transmission assembly.

Each LG assembly has a microswitch which closes upon full extension of its respective LG assembly. When properly adjusted, microswitch closure occurs when the overcenter stops are in contact with one another. The three microswitches are wired in series. Closure of all three microswitches is required to complete an electrical circuit that allows passage of an input signal that is used to stop the extension motor, and to illuminate the green instrument panel light that denotes that the landing gear is fully extended. METEOROLOGICAL INFORMATIONThe 1953 SJC automated weather observation included winds from 240° at 8 knots, visibility 10 miles, few clouds at 2,000 ft, scattered clouds at 3,200 ft, a broken cloud layer at 6,000 ft, temperature 14°C, dew point 8°C, and an altimeter setting of 29.95 inches of mercury. AIRPORT INFORMATIONThe airplane was manufactured in 1958, and was equipped with a Lycoming O-540 series piston engine. The airplane was purchased by its current owners in 2013, who placed it on leaseback to Plus One Flyers. According to the maintenance records, the most recent annual inspection was completed on May 18, 2018. At that time the airplane had accumulated a total time in service of about 2,918 hours. The maintenance records indicated that all applicable FAA airworthiness directives (AD), including AD 77-13-21 for the main landing gear bungees, had been complied with.

Landing Gear System

The tricycle-style landing gear (LG) is electrically controlled during normal operation by a landing gear handle on the instrument panel, and electrically actuated by a single motor-transmission mounted in the cockpit floor. All 3 LG are mechanically interlinked, and move in unison. Once adjusted by a technician, their geometric inter-relationship is fixed, and can only be altered by re-adjustment, or mechanical deformation of one or more of the system components.

When extended, each LG assembly is locked in place by an overcenter link assembly, whereby the integral stops on each LG assembly prevent overtravel during extension, while ensuring that each LG assembly is fully extended. The travel of each LG assembly and its links during extension is governed by mechanical adjustment of the system's respective links. Nose LG (NLG) travel is accomplished by adjustment of the NLG actuating rod and rod end assembly that extend forward from the landing gear motor-transmission assembly.

Each LG assembly has a microswitch which closes upon full extension of its respective LG assembly. When properly adjusted, microswitch closure occurs when the overcenter stops are in contact with one another. The three microswitches are wired in series. Closure of all three microswitches is required to complete an electrical circuit that allows passage of an input signal that is used to stop the extension motor, and to illuminate the green instrument panel light that denotes that the landing gear is fully extended. WRECKAGE AND IMPACT INFORMATIONThe airplane came to rest upright on the runway, with all 3 LG retracted almost completely into their respective wells. According to technicians from a repair facility on SJC who were summoned to recover the airplane from the runway, they found the cockpit LG handle to be in the fully DOWN position. The technicians did not move or cycle any cockpit controls, including the LG handle, prior to lifting the airplane for recovery. As the airplane was lifted off its belly, all three LG moved from their retracted to their partially extended positions. One technician then manually pulled the NLG forward as far as able towards its extended position, and this caused the two MLG to fully extend and lock. The emergency LG extension system was intact and undisturbed, and all other system components were securely attached, and showed no evidence of failure or disconnect.

The airplane was towed to the repair facility ramp on its gear, and examined for damage. Several skins were ground through, and several underlying fuselage frames incurred substantial damage from the slide on the runway. Visual inspection of the 3 wheel wells and LG linkage components therein did not reveal any obvious failures, or disconnected or damaged hardware. The RMLG tire and wheel had scuff marks on their outboard sides.

Initial Landing Gear Cycle Tests

The airplane was raised on jacks, auxiliary electrical power was provided to the airplane, and the instrument panel (normal) LG handle was raised to the "UP" position. The gear retracted normally, the gear motor shut off, and the amber LG cockpit status light illuminated (per normal operation). Attempts to extend the gear via the normal handle and system were only partly successful; the gear extended, but the motor continued to run, and the green indicator light (denoting gear fully extended) did not illuminate. Manual attempts to fully extend the NLG were unsuccessful. This process was repeated, with the same results. The green bulb was confirmed to be functional.

With the gear extended and the electrical power off, the 3 LG were manually manipulated to try to unlock and move them towards the retract position. The 2 MLG were unable to be moved when they were pushed inboard, the normal retraction direction. Light to moderate kicks in the aft direction on the NLG tire caused the system to unlock, and all 3 gear to move in their respective retracting directions. The gear moved freely, and could be manually pushed up to nearly the retracted position, and the process was repeatable.

When the gear was extended via the normal system, the MLG overcenter stops were observed to be ...