N62069

Substantial
None

Beech 65S/N: 62-3866

Accident Details

Date
Friday, February 22, 2019
NTSB Number
CEN19LA086
Location
Colby, KS
Event ID
20190222X83745
Coordinates
39.427223, -101.052780
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot’s failure to properly secure the crew hatch door before takeoff, which resulted in his distraction and his failure to maintain airplane control and airspeed.

Aircraft Information

Registration
Make
BEECH
Serial Number
62-3866
Engine Type
Reciprocating
Model / ICAO
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2
Seats
9
FAA Model
U-8F

Registered Owner (Current)

Name
BEMIDJI AVIATION SERVICES INC
Address
4125 HANGAR DR NW
City
BEMIDJI
State / Zip Code
MN 56601-6243
Country
United States

Analysis

On February 22, 2019, about 0945 central standard time, a Beech 65 airplane, N62069, impacted terrain near Colby, Kansas, while maneuvering for a precautionary landing. The commercial pilot was not injured, and the airplane sustained substantial damage. The airplane was registered to and operated by Bemidji Aviation Services, Inc., as a Title 14 Code of Federal Regulations Part 91 positioning flight. Day instrument meteorological conditions prevailed at the time of the accident, and an instrument flight rules flight plan was filed. The flight was originating from Shalz Field Airport (CBK), Colby, Kansas, and destined for Denver, Colorado.

According to the pilot, shortly after takeoff, he noticed the crew hatch door, located next to the left front seat, had unexpectedly opened. The pilot attempted to close the door, without success. While focusing on trying to close the door, the pilot "wasn't able to fully control the airplane normally (mainly [in] heading and pitch)," so he initiated a precautionary landing back to CBK. While maneuvering at a low altitude to stay in visual flight rules conditions (overcast ceiling at 300 ft), the airplane's airspeed decreased, and the wing tips were dipping back and forth. The pilot retracted the landing gear and applied full engine power to try and gain airspeed. The pilot was unable to gain airspeed, the airplane was losing altitude, and he knew the airplane was going to impact terrain. Prior to the impact, the pilot kept the wings level, and the nose in a slightly pitch up attitude. The airplane then impacted the snow-covered terrain with the landing gear retracted.

Postaccident examination of the airplane by the operator revealed the left wing and left aileron were bent. No evidence was noted that the crew hatch door malfunctioned during the flight.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN19LA086