Summary
On September 04, 2019, a Cessna 180 (N9250T) was involved in an incident near Lancaster, TX. All 1 person aboard were uninjured. The aircraft sustained substantial damage.
The National Transportation Safety Board determined the probable cause of this incident to be: The pilot's failure to maintain directional control during landing, which resulted in a ground loop.
The pilot of the tailwheel equipped airplane reported that, during a three-point landing, the airplane veered left, ground looped left, exited the runway, and nosed over.
The airplane sustained substantial damage to right-wing lift strut and empennage.
The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
This incident is documented in NTSB report GAA19CA548. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N9250T.
Accident Details
Probable Cause and Findings
The pilot's failure to maintain directional control during landing, which resulted in a ground loop.
Aircraft Information
Registered Owner (Historical)
Analysis
The pilot of the tailwheel equipped airplane reported that, during a three-point landing, the airplane veered left, ground looped left, exited the runway, and nosed over.
The airplane sustained substantial damage to right-wing lift strut and empennage.
The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# GAA19CA548