N6353U

Substantial
None

CESSNA T210RS/N: 21064941

Accident Details

Date
Thursday, July 7, 2022
NTSB Number
WPR22LA248
Location
Stanley, ID
Event ID
20220712105459
Coordinates
44.211689, -114.934370
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
4
Total Aboard
4

Probable Cause and Findings

The pilot’s failure to provide adequate braking during a tailwind landing, which resulted in a runway excursion.

Aircraft Information

Registration
Make
CESSNA
Serial Number
21064941
Engine Type
Reciprocating
Year Built
1985
Model / ICAO
T210RC210
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
T210R

Registered Owner (Current)

Name
BAS PART SALES LLC
Address
575 ED BEEGLES LN
City
GREELEY
State / Zip Code
CO 80631
Country
United States

Analysis

On July 07, 2022, about 1440 Mountain daylight time, a Cessna T210R, N6353U, was substantially damaged when it was involved in an accident near Stanley, Idaho. The pilot and three passengers were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 135 on-demand air taxi flight.

The pilot stated that after an uneventful flight he entered the proximity of the destination airport about 1,500 ft above ground level. He noted that the airport’s north windsock indicated a direct crosswind, and the south windsock indicated the wind was from the southwest at 10-15 mph. He decided to land on runway 17 and maneuvered the airplane to enter the downwind leg of the traffic pattern around midfield. During the landing phase, he was unable to maintain a stable approach and performed a go-around immediately after touching down. He then made an approach to runway 35 and touched down on the runway surface just past the south windsock (located about 1/3 down the runway). With about 2,300 ft of runway remaining, the pilot immediately applied heavy braking and retracted the wing flaps. The brakes did not respond, and he attempted to rapidly depress and release them (pump) several times. Despite his attempts, the brakes did not function, and he was unable to stop the airplane. The airplane continued off the end of the runway, went down a hill, and collided with trees.

The airplane had undergone an annual inspection on July 01, 2022, or 6 days before the accident. Since that maintenance, he had flown the airplane on three flights.

Investigators from the Federal Aviation Administration responded to the accident site. One stated there was no evidence of skid marks on the runway and no flat spots on the tires. Their examination of the brake system revealed no signs of hydraulic leaks and the brake master cylinder was approximately two-thirds full. The right brake was non-operational due to damage to the brake line at the caliper as a result of it striking rocks at the runway's end. The left brake appeared to function correctly. The inspectors physically engaged the brakes by pressing the pedals with their feet. One inspector stated that while the brakes weren't exceptionally firm, it was a common characteristic in this make and model airplane.

A weather station located 12 miles east of the airport recorded that at the time of the accident, the wind was from the southwest at 8 knots, equating to a tailwind of about 5 knots. The pilot reported the wind was from the southwest at 10-15 knots.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR22LA248