N6798T

HISTORY OF FLIGHTOn May 6, 2023, at 1522 central daylight time, a Cessna 310D, N6798T, was destroyed when it was involved in an accident near Ennis, Texas. The pilot and pilot-rated front-seat passenger were seriously injured, and the rear-seat passenger was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

ADS-B data was not available for the accident flight. The pilot-rated front seat passenger reported that the pilot chose to perform a go-around while on final approach for runway 16 at Ennis Municipal Airport (F41), Ennis, Texas. However, the passenger reported she was not sure why the go-around was initiated. During the go-around, the airplane veered to the right and rolled. A statement from the pilot was not received due to the pilot’s injuries.

The airplane impacted cedar trees and terrain about 1/4 mile southwest of the runway. A post-impact fire ensued and destroyed the airplane. PERSONNEL INFORMATIONAccording to the pilot’s logbook, he passed his private pilot multi-engine check ride on January 12, 2023. The pilot had accumulated a total of 13.9 hours of multi-engine flight time, all of which were in the accident airplane make and model. AIRCRAFT INFORMATIONThe airplane was purchased by a family member in June 2021. According to logbook records, the first annual inspection performed after purchase was in August 2022. The airframe annual inspection was noted by a mechanic as unairworthy. However, the engines were found to be airworthy, and the annual inspection was signed off for the engines. A list of airframe deficiencies was given to the airplane owner. The owner took the airplane to another mechanic, and the deficient airframe items were addressed. The airplane was approved for return to service by the second mechanic in January 2023.

In February 2020, Continental Aerospace Technologies Service Bulletin (SB20-01) was issued for IO-470-D engines. This SB calls for the fuel plug and screen assembly on the fuel injection control assembly to be removed and cleaned during every annual inspection. An engine logbook entry from the mechanic who signed off the annual inspection on the engines revealed that all fuel injector components were cleaned on both engines, and all engine airworthiness directives were complied with. However, the mechanic stated that their records do not indicate whether SB20-01 was performed.

Before the August 2022 and January 2023 annual inspections, the airplane had not had an annual inspection since June 2013. Additionally, the engine logbooks indicated that both engines were overhauled in November 2001. When the engines were overhauled, all rubber flexible fluid-carrying hoses were replaced. A review of the airframe and engine maintenance logbooks revealed no record of the hoses having been replaced since the November 2001 overhaul.

The airplane was equipped with two Continental IO-470-D engines. Continental recommends hoses be replaced as needed upon a conditional inspection or at engine overhaul. Continental also recommends that the IO-470-D be overhauled at 1,500 hours or every 12 years, whichever occurs first due to the possible deterioration of rubber that could affect the airworthiness of the engine and engine-mounted components and accessories.

At the time of the August 2022 and January 2023 annual inspections, the recorded Hobbs time in the maintenance records was 1,526.4. The airplane had avionics maintenance performed on May 2, 2023, and the recorded Hobbs time was 1,532.7. A search of ADS-B data revealed that the last recorded flight was April 28, 2023, so between the time the airplane was signed off as airworthy in January 2023 and the accident flight, the airplane accumulated about 6 hours of flight time. AIRPORT INFORMATIONThe airplane was purchased by a family member in June 2021. According to logbook records, the first annual inspection performed after purchase was in August 2022. The airframe annual inspection was noted by a mechanic as unairworthy. However, the engines were found to be airworthy, and the annual inspection was signed off for the engines. A list of airframe deficiencies was given to the airplane owner. The owner took the airplane to another mechanic, and the deficient airframe items were addressed. The airplane was approved for return to service by the second mechanic in January 2023.

In February 2020, Continental Aerospace Technologies Service Bulletin (SB20-01) was issued for IO-470-D engines. This SB calls for the fuel plug and screen assembly on the fuel injection control assembly to be removed and cleaned during every annual inspection. An engine logbook entry from the mechanic who signed off the annual inspection on the engines revealed that all fuel injector components were cleaned on both engines, and all engine airworthiness directives were complied with. However, the mechanic stated that their records do not indicate whether SB20-01 was performed.

Before the August 2022 and January 2023 annual inspections, the airplane had not had an annual inspection since June 2013. Additionally, the engine logbooks indicated that both engines were overhauled in November 2001. When the engines were overhauled, all rubber flexible fluid-carrying hoses were replaced. A review of the airframe and engine maintenance logbooks revealed no record of the hoses having been replaced since the November 2001 overhaul.

The airplane was equipped with two Continental IO-470-D engines. Continental recommends hoses be replaced as needed upon a conditional inspection or at engine overhaul. Continental also recommends that the IO-470-D be overhauled at 1,500 hours or every 12 years, whichever occurs first due to the possible deterioration of rubber that could affect the airworthiness of the engine and engine-mounted components and accessories.

At the time of the August 2022 and January 2023 annual inspections, the recorded Hobbs time in the maintenance records was 1,526.4. The airplane had avionics maintenance performed on May 2, 2023, and the recorded Hobbs time was 1,532.7. A search of ADS-B data revealed that the last recorded flight was April 28, 2023, so between the time the airplane was signed off as airworthy in January 2023 and the accident flight, the airplane accumulated about 6 hours of flight time. WRECKAGE AND IMPACT INFORMATIONThe airplane impacted a lightly wooded area about 1/4 mile southwest of F41. The impact path was on a heading of about 234° and the airplane came to rest upright about 75 ft from the initial impact site on a heading of about 100°. Debris consistent with the right wing and right engine were found in between the initial tree strike and the main wreckage.

The right engine, with the propeller still attached at the flange, was found about 30 ft southwest of the main wreckage. The main wreckage consisted of the fuselage, left and right wings, left engine, left propeller, and empennage. The main wreckage, except for the right wing and empennage, exhibited burn damage consistent with postimpact fire. Except for the left aileron, which was consumed by fire, all primary and secondary control surfaces were intact and attached to the airplane, and control cable continuity was confirmed from each control surface to the cockpit. The propellers and engines were moved to a secure location for further examination.

On the left propeller, both blades exhibited chordwise/rotational scoring on the camber and face sides with bending and twisting damage. Both blades had wave bends on the leading edge. The left propeller was in a low pitch setting and was not feathered.

On the right propeller, there was chordwise/rotational scoring on the camber side of one blade. Blade damage included simple bending with no remarkable twisting or leading edge damage. The right propeller was in a low pitch setting and was not feathered. Examination of the left engine revealed soot deposits, debris, and some impact damage. Compression and suction were obtained on all cylinders. There were no preimpact mechanical failures or malfunctions noted that would have precluded normal operation.

Examination of the right engine revealed soot deposits, debris, and impact damage. Compression and suction were obtained on all cylinders. The right engine was run in a test cell and initially ran roughly. The fuel plug and screen assembly from the fuel injection control assembly housing was removed. It was obstructed with black debris, small string-like fibers, and metallic fragments. The fuel plug and screen were replaced with a new exemplar component. During the second engine run, the engine started without hesitation and ran smoothly. The original fuel screen was sent to the National Transportation Safety Board (NTSB) Materials Laboratory for analysis along with a sample of the right fuel bladder.

The NTSB materials laboratory tested the black debris and metallic particles found on the right engine fuel plug and screen assembly. The black debris was a match for polyurethane. The metallic particles consisted of brass (copper and zinc) and aluminum

The flexible fluid-carrying hoses are made of polyurethane. However, due to post-impact fire damage, a sample of the hoses was unable to be retained for analysis to determine a match.

According to Continental Motors, the polyurethane and string-like fibers were consistent with a flexible fluid-carrying hose. INJURIES TO PERSONSThe pilot and front seat passenger sustained serious injuries, and the backseat passenger was fatally injured.