N6789R

Substantial
None

CESSNA T210S/N: T210-0189

Accident Details

Date
Wednesday, December 13, 2023
NTSB Number
CEN24LA063
Location
Sapulpa, OK
Event ID
20231214193524
Coordinates
36.009444, -96.031667
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The total loss of engine power due to the failure of the left magneto and subsequent damage to a lead for the right magneto.

Aircraft Information

Registration
Make
CESSNA
Serial Number
T210-0189
Engine Type
Reciprocating
Year Built
1966
Model / ICAO
T210T210
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
4
FAA Model
T210F

Registered Owner (Current)

Name
DODSON INTERNATIONAL PARTS INC
Address
2155 VERMONT RD
City
RANTOUL
State / Zip Code
KS 66079-9014
Country
United States

Analysis

On December 13, 2023, about 1730 central standard time, a Cessna T210F airplane, N6789R, was substantially damaged when it was involved in an accident near Sapulpa, Oklahoma. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The purpose of the flight was to perform an initial break-in of the engine, which had recently been overhauled. Shortly after takeoff, the engine lost all power, but the propeller continued windmilling. The pilot attempted to restore engine power but was unsuccessful.

Unable to return to the airport, the pilot performed a forced landing to a road, during which the pilot maneuvered to avoid a vehicle and landed hard. During the landing roll, the right main landing gear and nose landing gear collided with a concrete curb, and the nose landing gear collapsed. The airplane sustained substantial damage to the fuselage and left wing.

A postaccident examination of the engine found that the left magneto had seized and was partially separated from the engine. Impact damage to the right magneto’s p-lead was observed and the right magneto was confirmed to be grounded.

Examination of the left magneto found that the internal components were heat damaged and melted. Due to the damage, further testing could not be conducted. The magneto had been rebuilt and installed on the engine during the most recent engine overhaul, which occurred about 1 hour before the accident.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN24LA063