N1230R

Substantial
None

LOCKWOOD AIR CAMS/N: AC205

Accident Details

Date
Saturday, January 20, 2024
NTSB Number
CEN24LA096
Location
Liberty Hill, TX
Event ID
20240122193690
Coordinates
30.738220, -97.971640
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The reported simultaneous and total loss of engine power to both engines during a power reduction for reasons that could not be determined.

Aircraft Information

Registration
Make
LOCKWOOD
Serial Number
AC205
Engine Type
Reciprocating
Year Built
2015
Model / ICAO
AIR CAMACAM
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2
Seats
2
FAA Model
AIR CAM

Registered Owner (Current)

Name
CUNNINGHAM ARGUS IAN
Address
2900 POST RIVER RD
City
CEDAR PARK
State / Zip Code
TX 78613-2515
Country
United States

Analysis

On January 20, 2024, about 1320 central standard time, a Lockwood Air Cam airplane, N1230R, sustained substantial damage when it was involved in an accident near Liberty Hill, Texas. The pilot and passenger were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot and passenger were returning to Fly Navy Airport, Liberty Hill, Texas (TA60). According to the pilot, while on a final approach to the runway, he reduced power and noticed both engines sustained a total loss of power. The pilot made a forced landing toward the runway and the airplane impacted a berm. The airplane sustained substantial damage to the left wing and fuselage. The fuel tanks were not compromised during impact and contained usable fuel.

The airplane was equipped with two Rotax 912 ULS engines. Each engine is supplied with fuel from separate independent fuel tanks and systems. Both engines had an aftermarket Zipper Big Bore kit installed and an aftermarket carburetor heat system that utilized engine coolant routed through a water jacket housing attached between the intake manifolds and carburetors. The carburetor heat system functioned when tested.

The carburetor bowls on each engine contained clean fuel consistent with 91 octane ethanol free automotive fuel. Examination of the carburetors revealed no malfunctions or failures that would have precluded normal operation. Multiple postaccident engine test runs were conducted on both engines at various power settings. The test runs did not identify any mechanical malfunctions or failures that would have precluded normal operation.

The crossover tube between the two intake manifolds was modified on both engines. The inside diameter of the crossover tube was increased by the modification. There were visible fuel stains at the threaded hose connectors; however, the induction system did not leak when tested.

A Dynon SV-D1000, capable of recording data, was sent to the NTSB Vehicle Recorder Division for data extraction. No anomalies were found within the data to explain the simultaneous loss of power to both engines.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN24LA096